Freeze Dryer
LyoMicron is designed for freeze-drying trials during the concept research stage or for small-scale lyophilization batches. Its compact design and powerful performance meet all laboratory requirements and can be equipped with a wide range of optional accessories. Therefore, the system provides the most suitable performance for every application need.
Ultrasonic bath
Ultrasonic bath have low electrical energy consumption and save time when compared to brushing out or other traditional methods. The areas which are difficult to access become clean and without traces of dirt, while the object surface is not damaged, as can happen with other methods. The NEPTUNO ultrasonic bath are made from stainless steel (AISI 304). We have various models according to capacity: 3 L / 6 L / 10 L / 20 L / 30 L.
Glove Box
Thin-Film aluminum oxide type. Microprocessor based, all digital technology for reliable operation. Compact size. Loop powered 4 to 20mA output. NIST traceable calibration. Accuracy : +/- 2℃ Measurement range : 0 ~ 1,000ppm Out Put : 4-20mA DC Active. Sensor : Thin-film capacitive polymer sensor Response time 63% [90%] at a gas temperature of +20℃...
HOT MELT EXTRUSION
Flexible Twin-Screw Extrusion for Pharmaceutical Development and Small-Scale Manufacturing The Thermo Scientific™ Pharma 11 Twin-Screw Extruder is a compact and versatile pharmaceutical processing platform designed for formulation development, process optimization, and small-scale commercial manufacturing. With a throughput range from 20 g/h to 2.5 kg/h, Pharma 11 enables researchers to efficiently develop and evaluate formulations while minimizing material consumption. This makes it particularly suitable for high-value APIs and other formulations where material availability and cost are critical considerations.
Stability Chamber
Newtronic's photo stability chambers are designed to meet light stability testing requirements in industries such as pharmaceuticals, cosmetics, food, and others. The chambers comply with ICH Q1B standards, ensuring efficiency, reliability, and safety.
Measuring Machine
The RM 200 PLUS Rheometer is the ideal solution for viscosity and rheological testing in both quality control and research & development environments. Featuring a modern 7-inch touchscreen interface, the RM 200 PLUS offers flexible, high-precision measurements with direct on-device data analysis. It is compatible with a wide range of measuring systems and temperature control units, while also supporting printer, PC, and specialized software connectivity.
Stability Chamber
The MIL sand & dust chamber is designed specifically to simulate desert environments for the testing of military equipment and devices. Inside the test space the dust is blown as per MIL-STD-810G Method 510.5 Procedure-I with a dust concentration of 10 + 7 g/m3 with air velocity of minimum 1.5 m/s up to 8.9 m/s. While the sand is blown as per MIL-STD-810G Method 510.5 Procedure-II with a sand concentration of 0.18 g/m3 to 2.2 g/m3, with an air velocity of 18-29 m/s.
Isolator
The HTY-ASL01/02 Sterility Test Pump is a dedicated fluid transfer solution developed for membrane filtration-based sterility testing in pharmaceutical, microbiological, and quality control laboratories. Designed for use with sterility test canister systems, the pump enables smooth and controlled transfer of test fluids throughout the filtration process. Its stable operation helps minimize variations caused by manual handling, supporting consistent and reproducible sterility testing results. The HTY-ASL01/02 is well suited for GMP-compliant QC laboratories requiring a reliable and standardized sterility testing workflow. The system can be integrated into testing procedures following the requirements and practices of major pharmacopoeias, including ChP, USP, EP, and JP.