WATER PURE TYPE II + CLRW (CLSI) – OmniaLabDS – STAKPURE

Brand:

Category:

When safety is first priority and the quality of the purification decides the quality of results, then the OmniaLabDS system is the perfect solution. Even for large pure water quantities of up to 80 l/h, OmniaLabDS guarantees international water standards compliance. The combination of regenerative polishing cartridge and an optional emergency supply makes this system extremely reliable for supplying clinical analytical systems, as well as for feeding water to steam sterilizers and washer-disinfectors.

Model: OmniaLabDS

* Features:

  • OptiFill Dispenser is standard
  • 100L tank with quality recirculation and pressure outlet
  • Tank volume display in percent
  • Tank volume can be modularly increased
  • Simple, cost-effective filter replacement
  • Leakage sensor is standard
  • Emergency supply (optional)
  • Degassing unit (optional)

* Specifications:

OmniaLabDS 20

 OmniaLabDS 40

OmniaLabDS 60
Pure water Typ II + CLRW (CLSI)

DIN EN 285 + ISO EN 15883

Pure water performance at 15°C [l/h]

20 40

60
Conductivity at 25 °C [µS/cm]

0.1 up to 1
Resistance at 25 °C [MΩ x cm]

10 up to 1
Dispensing performance dispenser [l/min.]

up to 2
Particles* > 0.2 µm [1/ml]

< 1
Bacteria* [KBE/ml]

< 0.1
Pure water tank pressurized outlet

optional
*with sterilizing filter 0.2 μm

* Feedwater Requirements:

OmniaLabDS 20/40/60
Softened or hardness-stabilized water according to DIN 2000
Feedwater temperature [°C]

+ 2 up to 35
Manganese and iron content [mg/l]

< 0.05
Free chlorine content [mg/l]

< 0.1
Silt density index (SDI)

max. 3

* Technical Data

OmniaLabDS 20/40/60
Connector size

R3/4″
Operating pressure [bar]

2 up to 6
Supply voltage [Volt/Hz]

90-240/50-60
Connected load [kW]

0.1
Ambient temperature [°C]

+ 2 up to 35
Dimensions tower* [W x H x D mm]

511 x 1520 x 575
Dimensions base cabinet tank [W x H x D mm]

511 x 800 x 575
Weight [kg]

39
* with OptiFill Dispenser

Related products

VAPOR COMPRESSION DISTILLER (STMC) - BRAM-COR

Pure Water

VAPOR COMPRESSION DISTILLER (STMC) – BRAM-COR

STMC models produce sterile WFI. Bram-Cor project drivers are aimed at satisfying all pharmaceutical regulatory and QA requirements, aligning the Vapor Compression Distiller manufacturing to the international cGMP (Good Manufacturing Practices) and Pharmacopoeias. Bram-Cor target in design, manufacturing, documentation, testing and validation activities focuses on the overall compliance of equipment to the needs of the pharmaceutical and biotechnology industry.

PURE AND ULTRAPURE WATER SYSTEM - STAKPURE

Pure Water

PURE AND ULTRAPURE WATER SYSTEM – STAKPURE

Model: Omnia Tap 6-12/UV/UV-UF The OmniaTap system is the choice when a small amount of both pure and ultrapure water is needed. It combines a compact size with high flexibility and can be directly connected to a tap water source. The standard OptiFill dispenser allows for one-handed operation of the system and monitors all quality parameters.

WATER FROM REVERSE OSMOSIS (TYPE III) - OmniaLabRO - STAKPURE

Pure Water

WATER FROM REVERSE OSMOSIS (TYPE III) – OmniaLabRO – STAKPURE

OmniaLabRO fulfils your requirement when you need a constant large volume of reverse osmosis (RO) water. For this, OmniaLabRO holds 100 litres in reserve in a storage tank. It is an optimal supplier to autoclaves, lab rinsing machines, air humidifiers and ultrapure water systems.

ULTRAPURE WATER PURIFIER SYSTEM, TYPE I QUALITY - STAKPURE

Pure Water

ULTRAPURE WATER PURIFIER SYSTEM, TYPE I QUALITY – STAKPURE

Model: Omnia PURE /UV/UV-UF/UV-TOC/UV-TOC-UF Reliable. Reproducible. The quality of the ultrapure water is what counts. Consistently high water quality is crucial for the reproducibility of the analysis results. The permanent data storage of all quality parameters and the possibility of outputting USB interface make the analysis results traceable at any time. Constant, highest quality standard. Our claim is to deliver consistently the highest water quality. Even in ultrapure water systems, stagnant water can lead to the formation of biofilm. That is why our Omnia series has a recirculation function that prevents the growth of biofilm, so that we even exceed the highest quality standards according to ASTM.

PRODUCT VIEWED

WATER PURE TYPE II + CLRW (CLSI) – OmniaLabDS – STAKPURE

When safety is first priority and the quality of the purification decides the quality of results, then the OmniaLabDS system is the perfect solution. Even for large pure water quantities of up to 80 l/h, OmniaLabDS guarantees international water standards compliance. The combination of regenerative polishing cartridge and an optional emergency supply makes this system extremely reliable for supplying clinical analytical systems, as well as for feeding water to steam sterilizers and washer-disinfectors.

XRF (P SERIES)- BOWMAN

XRF P Series allows for the measurement of various sample sizes, shapes, and quantities. Its high-precision programmable X-Y stage enables easy operation through software, allowing users to move to measurement locations with a mouse or create multi-point measurement programs with a single click. This optimizes testing for critical areas and larger sample volumes. The standard configuration includes a 4-position collimator assembly, a variable-focus camera for measuring recessed areas, an SDD detector, and a long-life micro-focus X-ray tube. Collimators and focal distances can be customized to suit specific applications.