High Temperature Test Chamber

Origin: China

Brand:

Category: Tags: ,
Tags: ,

Neware environmental test chambers provide an economical and space-saving solution for a variety of testing requirements. The thermal test chambers are used for a range of testing applications such as safety tests of lithium-ion batteries, stability and shelf-life testing of sensitive electronics and pharmaceuticals, and more applications in aerospace, automotive, consumer products, packaging etc.

Neware environmental test chambers provide an economical and space-saving solution for a variety of testing requirements. The thermal test chambers are used for a range of testing applications such as safety tests of lithium-ion batteries, stability and shelf-life testing of sensitive electronics and pharmaceuticals, and more applications in aerospace, automotive, consumer products, packaging etc.

The high-temperature test chamber has a temperature range from 15°C above room temperature to 150°C with a fluctuation of less than 1.0°C and a deviation of ±2.0°C. >>more info>>>

Add-on Functions (Multiple choice)

▢Explosion-Proof                    ▢Automatic Fire Extinguisher

Nominal Internal Volume

  Single-Layer 100L 150L 225L 408L 800L 1000L
  Double-Layer – 150L*2 225L*2 – – –

Model Selection>>>

Related products

BTS4000 10V-50V series for modules - Neware

Battery Tester

BTS4000 10V-50V series for modules – Neware

BTS4000 10V-50V battery testers for battery modules and packs. Almost all the models can be customized with multi output ranges, if you need that, please tell your sales representative.

BTS4000 energy saving series - Neware

Battery Tester

BTS4000 energy saving series – Neware

By adopting back-to-grid technology, Neware BTS4000 ES series testers can return the discharged battery energy back to the power grid. Thus, the ES series Neware battery testers have following advantages comparing with traditional testers: smaller dimension, very limited heat emission, energy saving, etc.

Explosion-Proof Test Chamber

Battery Tester

Explosion-Proof Test Chamber

Explosion-proof test chambers allow for testing where the product, component or material under test has the potential for explosion. Used in industries such as battery, chemical, pharmaceutical, paint and others.

Neware BTS9000

Battery Tester

Neware BTS9000

Neware BTS9000: the most advanced battery cyclers/analyzers/testers for you to find future battery material.

Neware IGBT

Battery Tester

Neware IGBT

Nonlinear technology brings you the cost-efficient and powerful battery packs tester. For large EV battery packs or energy storage system. BMS communication supported and regenerative.

BTS4000 special series - Neware

Battery Tester

BTS4000 special series – Neware

Neware BTS4000 special series for: EDLC(super capacitors), Power banks, etc.

BTS4000 high power series for packs - Neware

Battery Tester

BTS4000 high power series for packs – Neware

60V-150V battery testers for testing battery packs. In fact, if you need 100V/200V BTS4000 such as 100V10A/20A/30A/50 or 200V/10A/20A etc., we can also customize them for you. But for testers higher than 100V100A, IGBT series would be a better choice.

BTS4000 5V series for cells

Battery Tester

BTS4000 5V series for cells

Neware BTS4000 5V series battery tester ranges from 1mA up to 3000A, you can use it to test coin cells, pouch cells, cylinder(18650, 26650, 27710, etc) and even paralleled battery modules and packs. For all the BTS4000 testers lower or equal to 30W(5V6A or 10V3A), the accuracy is 0.05%FS. And for all the BTS4000 testers higher than 30W, the accuracy is 0.1%FS.

PRODUCT VIEWED

TEMPERATURE AND HUMIDITY TEST CHAMBERS PH70 – FRIMED

The PH70 is a 700L test chamber with precise temperature (10°C to +60°C) and humidity (20%-85% RH) control. It features a corrosion-resistant exterior, stainless steel interior, CFC-free insulation, and a PID-controlled 9” touchscreen. Equipped with safety features and an alarm system, it meets European standards, making it ideal for research and quality control.

AMERIGO PARTICLE SIZE & ZETA POTENTIAL – CORDOUAN

AMERIGO is an innovative analyzer for the characterization of nanoparticle suspensions combining into the same instrument Particle Size and Zeta Potential measurements. It is based on state of the art version of Dynamic Light Scattering (DLS) and Laser Doppler Electrophoresis (LDE) techniques offering high resolution, accurate and rapid measurement. These two techniques provide complementary information about the nanoparticle solution: the size of the nanoparticles and the stability of the formulation.

VISCOMETER FIRST PLUS – LAMY

FIRST PLUS is a high-performance rotational viscometer, suitable for both laboratory research and quality control applications. This springless instrument features a 7-inch touchscreen display, enabling precise viscosity measurements across a wide speed range. With USB and Ethernet connectivity, integrated temperature probe, data logging capability, and RheoTex software compatibility, the FIRST PLUS offers exceptional versatility. It supports multiple spindle systems and accessories, delivering flexibility and high reliability for demanding industrial applications.

RAMAN-SEM MICROSCOPES (RISE) – OXFORD INSTRUMENTS (WITec)

The Raman-SEM microscope is the world’s first fully integrated system combining Raman spectroscopy and Scanning Electron Microscopy (SEM) in a single instrument. With its novel correlative microscopy approach, RISE merges the ultrastructural surface analysis capability of SEM with molecular compound information from confocal Raman imaging. The system enables seamless switching between Raman and SEM measurements, supported by a user-friendly software interface for intuitive control. The RISE microscope not only maintains the full performance of both techniques but also provides precise correlation between the measurement results.