Mini Constant Climate Chamber (Desktop)

Origin: China

Brand:

Category: Tags: ,
Tags: ,

With a foot print as small as 360mm*450mm, Neware mini chamber is perfect for small batch battery tests in the research and development labs.

With a foot print as small as 360mm*450mm, Neware mini chamber is perfect for small batch battery tests in the research and development labs.

The mini constant climate chamber provides a steady temperature condition in the range from 15°C to 60°C. Such condition is necessary when doing charge-discharge cycle tests under different temperature conditions to analyze the change in performance and energy capacity.

Model Selection

▢Desktop Chamber (Support Max. 32 Channels)                 ▢Desktop Chamber with BTS (16 Channels)

Heating/Cooling Method

✔Semiconductor Heating 25→60°C ≤40 mins
Cooling 25→15°C ≤60 mins

Related products

BTS4000 10V-50V series for modules - Neware

Battery Tester

BTS4000 10V-50V series for modules – Neware

BTS4000 10V-50V battery testers for battery modules and packs. Almost all the models can be customized with multi output ranges, if you need that, please tell your sales representative.

High Temperature Test Chamber

Battery Tester

High Temperature Test Chamber

Neware environmental test chambers provide an economical and space-saving solution for a variety of testing requirements. The thermal test chambers are used for a range of testing applications such as safety tests of lithium-ion batteries, stability and shelf-life testing of sensitive electronics and pharmaceuticals, and more applications in aerospace, automotive, consumer products, packaging etc.

BTS4000 special series - Neware

Battery Tester

BTS4000 special series – Neware

Neware BTS4000 special series for: EDLC(super capacitors), Power banks, etc.

High Low Temperature Test Chamber

Battery Tester

High Low Temperature Test Chamber

Neware high low temperature test chambers are available in a variety of configurations that can meet your specific temperature, humidity, and safety protection requirements. The high low temperature test chamber aims to test the performance of batteries under a simulated harsh climate conditions, which can provide a good reference for the researchers and engineers at the product design and development stage.

Thermal Conductivity - Surface Electro Optics

Measuring Machine

Thermal Conductivity – Surface Electro Optics

This advanced thermal conductivity measurement system offers two standardized methods: (1) Vertical (ASTM D5470) for steady-state measurements (0.1–80 W/m·K) using copper pillars, ideal for low-conductivity materials like insulators, and (2) Horizontal (Angström’s Method) for transient measurements (0.1–1,000 W/m·K), suitable for high-conductivity materials like metals. The vertical method requires two sample thicknesses for accuracy but eliminates contact resistance, while the horizontal method uses temperature wave analysis for faster results without thickness constraints. Both methods feature ±0.001°C resolution, automated pressure/positioning controls, and comply with international standards, ensuring precision and reproducibility unmatched by domestic alternatives.

Neware BTS9000

Battery Tester

Neware BTS9000

Neware BTS9000: the most advanced battery cyclers/analyzers/testers for you to find future battery material.

Neware IGBT

Battery Tester

Neware IGBT

Nonlinear technology brings you the cost-efficient and powerful battery packs tester. For large EV battery packs or energy storage system. BMS communication supported and regenerative.

BTS4000 5V series for cells

Battery Tester

BTS4000 5V series for cells

Neware BTS4000 5V series battery tester ranges from 1mA up to 3000A, you can use it to test coin cells, pouch cells, cylinder(18650, 26650, 27710, etc) and even paralleled battery modules and packs. For all the BTS4000 testers lower or equal to 30W(5V6A or 10V3A), the accuracy is 0.05%FS. And for all the BTS4000 testers higher than 30W, the accuracy is 0.1%FS.

PRODUCT VIEWED

Automatic Video Measuring Machines CHT0810 – CHOTEST

Automatic video measuring machines CHT series covers different measurement ranges offers powerful functionality and can perform precise measurements of surface dimensions, contours, angles, positions, and geometric tolerances for various complex parts.

Contact Angle S-EO

Contact Angle from Surface Electro Optics What is Contact Angle? The Contact Angle is well-known technique for investigating and controlling adhesion, surface treatments and cleaning, and polymer modification. The contact angle is the angle between the tangent to the drop’s profile and the tangent to the surface at the intersection of the vapor, the liquid...

TEXTURE ANALYZER TX-700 – LAMY

The TX-700 Texture Analyzer is an instrument for measuring the strength and mechanical properties of material samples in both compression and tension modes. It features a 7’’ color touchscreen, supports multiple interchangeable load sensors ranging from 10N to 500N, and provides high accuracy (±0.5% FS) with flexible speeds (0.1–10 mm/s). The device offers various test modes such as compression, tension, relaxation, TPA cycles, and penetration. It allows data storage and export via USB, as well as PC and printer connectivity. Equipped with an integrated adjustable tray and a wide range of probes and optional accessories, it is ideal for research and quality control in food, pharmaceutical, and material applications.

RHEOMETER RM 200 PLUS – LAMY

The RM 200 PLUS Rheometer is the ideal solution for viscosity and rheological testing in both quality control and research & development environments. Featuring a modern 7-inch touchscreen interface, the RM 200 PLUS offers flexible, high-precision measurements with direct on-device data analysis. It is compatible with a wide range of measuring systems and temperature control units, while also supporting printer, PC, and specialized software connectivity.